NSN 5305-00-282-0115
Bolt Stove
Between 1.828 inches and 1.875 inches fastener length, flat countersunk head style, between 0.327 inches and 0.385 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-10R29 for national stock number 5305002820115.
Datasheet
-
Product description
Machine Screw NSN 5305-00-282-0115.
-
MPN or Model
AN509-10R29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.438 inches and 0.516 inches -
Fastener Length
Between 1.828 inches and 1.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.327 inches and 0.385 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-939-9126 MPN NAS25Trunnion Tank Strap
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-454-0319 MPN NAS1063A10-105AATerminal Board Marker Strip
- 5940-01-381-7077 MPN NAS1063B180-191Terminal Board Marker Strip
- 5305-00-008-3700 MPN NAS1191C04P6LSocket Head Cap Screw
- 5305-00-052-4045 MPN NAS1081-5A8Setscrew
- 5305-00-052-6908 MPN MS24629-4Tapping Screw
- 5305-00-052-9049 MPN MS24630-34Tapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-282-0115 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-10R29 | Aeronautical Standards Group |
MILS7839 | National Aerospace Standards |
AN509-10R29REV2 | Aeronautical Standards Group |
MILS7839 | Military Specifications |