NSN 5305-00-282-3265
High Torque Screw
Between 1.953 inches and 2.000 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number NAS335PA17 for national stock number 5305002823265.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-282-3265.
-
MPN or Model
NAS335PA17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.953 inches and 2.000 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Single Shear Strength
7300 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
34.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 or steel comp 4037 or steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas335 professional/industrial association standard
More from these suppliers
- 5940-01-425-6045 MPN NAS1063A5-440Terminal Board Marker Strip
- 5940-01-612-7438 MPN NAS1063B2-4Terminal Board Marker Strip
- 5305-00-007-1556 MPN NAS1100E02-3PMachine Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
- 5305-00-106-6246 MPN MS27039C5-12Machine Screw
- 5305-00-141-7174 MPN NAS1191-06P4Socket Head Cap Screw
- 5305-00-145-0967 MPN NAS1101E08-36Machine Screw
- 5305-00-151-2026 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-282-3265 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335PA17 | National Aerospace Standards |