NSN 5305-00-282-4107
Bolt Stove
Between 0.828 inches and 0.875 inches fastener length, flat countersunk head style, between 0.569 inches and 0.635 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-616R12 for national stock number 5305002824107.
Datasheet
-
Product description
Machine Screw NSN 5305-00-282-4107.
-
MPN or Model
AN509-616R12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.573 inches and 0.734 inches -
Fastener Length
Between 0.828 inches and 0.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.569 inches and 0.635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response or an-s-9 military standard single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-237-9235 MPN AN3102A36-10PElectrical Receptacle Connector
- 5975-00-295-9324 MPN AN3054-40Electrical Conduit Coupling Nut
- 5935-00-222-7912 MPN AN3106A40-9PElectrical Plug Connector
- 5305-00-078-8708 MPN AN565EC6H2Setscrew
- 5305-00-144-3749 MPN AN520-8R36Machine Screw
- 5305-00-151-0930 MPN AN505-4-3Machine Screw
- 5305-00-151-3242 MPN AN507Machine Screw
- 5305-00-281-1562 MPN AN510-10R13Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-282-4107 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-616R12 | Aeronautical Standards Group |
Stock Check
- NS: 3217
- NE: 33