NSN 5305-00-282-8525
Bolt Stove
Between 0.219 inches and 0.250 inches fastener length, flat countersunk head style, between 0.249 inches and 0.279 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN507C632-4 for national stock number 5305002828525.
Datasheet
-
Product description
Machine Screw NSN 5305-00-282-8525.
-
MPN or Model
AN507C632-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.188 inches and 0.250 inches -
Fastener Length
Between 0.219 inches and 0.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.249 inches and 0.279 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 303 or steel comp 303se or steel comp 430 or steel comp 302 -
Screw Material Specification
Mil-s-7720 military specification 1st material response or mil-s-18732 military specification 2nd material response or qq-s-763 federal specification 3rd material response or mil-s-7720 military specification 4th material response -
Screw Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-577-8614 MPN W-S-896/3Toggle Switch
- 5905-01-158-9002 MPN RLR07C9091FRFilm Fixed Resistor
- 5935-01-012-3080 MPN W-C-596/12-2 MODIFIEDElectrical Receptacle Connector
- 4820-00-203-3669 MPN WW-V-51Check Valve
- 5935-01-085-0541 MPN W-C-596/35Electrical Plug Connector
- 5925-00-878-1932 MPN WC375/10Circuit Breaker
- 5305-00-005-8227 MPN FFS85TYPE1STYLE10PHexagon Head Cap Screw
- 5305-00-010-0952 MPN FFS92TYPE1STYLE1SMachine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-282-8525 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN507C632-4 | Aeronautical Standards Group |
FFS92ANDTYPE1ANDSTYLE3 | Federal Specifications |