NSN 5305-00-283-7496
High Torque Screw
Between 2.022 inches and 2.068 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4672 inches and 0.4682 inches .
Manufacturer part number HS2623-7Z23 for national stock number 5305002837496.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-283-7496.
-
MPN or Model
HS2623-7Z23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.574 inches and 0.640 inches -
Fastener Length
Between 2.022 inches and 2.068 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4672 inches and 0.4682 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
23-105 fscm 76301 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps 13145 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf -
Specification Data
76301-st3-547 manufacturers standard
More from these suppliers
- 5305-00-144-9753 MPN NAS1101E08-7Machine Screw
- 5305-00-150-3411 MPN NAS1191-08P10NSocket Head Cap Screw
- 5305-00-354-5155 MPN HT4024L4-9Close Tolerance Screw
- 5305-00-456-2431 MPN E125-622Machine Screw
- 5305-00-505-3382 MPN LS15234C3-15Close Tolerance Screw
- 5305-00-520-2317 MPN DRB7500-8-A-3Panel Screw Assembly
- 5305-00-559-4899 MPN HS2623-7Z284Shoulder Screw
- 5305-00-725-5911 MPN E125-515Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-283-7496 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HS2623-7Z23 | Huck International, Inc. |
HT308-7-23 | Hi-shear Corporation |
66904H7-23 | Sps Technologies, Llc |
HT308-7-23 | Lisi Aerospace Canada Corp |
HS2623-7223 | Huck Intl Inc |
ST3M547-7-23 | Boeing Company, The |
HS2623-7Z23 | Huck Intl Inc |
66904H7-23 | Sps Technologies Inc |
HS2623-7223 | Huck International, Inc. |