NSN 5305-00-288-2413
High Torque Screw
Between 1.701 inches and 1.748 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HT195-5-20 for national stock number 5305002882413.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-288-2413.
-
MPN or Model
HT195-5-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.701 inches and 1.748 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
23-105 fscm 76301 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps 13145 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-676-8803 MPN 66117H6-16Close Tolerance Screw
- 5320-00-161-2052 MPN HL73PB18Pin-rivet Collar
- 5320-00-916-6726 MPN 66417V6-5Pin-rivet
- 5305-00-100-6602 MPN NAS1124-11Close Tolerance Screw
- 5305-00-137-3045 MPN 94703L94C4Socket Head Cap Screw
- 5305-00-508-6586 MPN LS15234-3-22Close Tolerance Screw
- 5305-00-913-7963 MPN NAS1101-4-28Machine Screw
- 5305-00-988-9204 MPN NAS1123-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-288-2413 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT195-5-20 | Hi-shear Corporation |
66117H5-20 | Sps Technologies, Llc |
HT8115-5-20 | Alcoa Global Fasteners, Inc. |
HT195-5-20 | Lisi Aerospace Canada Corp |
3M263-5-20 | Boeing Company, The |
HS2623-5Z20 | Huck Intl Inc |
66117H5-20 | Sps Technologies Inc |