NSN 5305-00-290-2044
Bolt Stove
0.250 inches fastener length, flat countersunk head style, between 0.207 inches and 0.225 inches head diameter, internal drive style: slot.
Manufacturer part number MS35241-20 for national stock number 5305002902044.
Datasheet
-
Product description
Machine Screw NSN 5305-00-290-2044.
-
MPN or Model
MS35241-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.207 inches and 0.225 inches -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel -
Screw Material Specification
Qq-w-409 federal specification single material response or qq-s-633-canc federal specification single material response -
Screw Surface Treatment
Cadmium or zinc -
Screw Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification 1st treatment response or qq-z-325, type 2, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type and 2s style
More from these suppliers
- 5940-00-058-8939 MPN MS25123-1-10Terminal Board Cover
- 5935-00-097-9523 MPN MS24264R14T7P7LEVELXElectrical Receptacle Connector
- 5905-00-104-5756 MPN MS35043-159Composition Fixed Resistor
- 5905-00-108-5585 MPN MS35046-41Nonprecision Wire Wound Variable Resistor
- 5940-00-115-0775 MPN MS20659-147Lug Terminal
- 5985-00-121-9844 MPN MS90035-49-144INWaveguide
- 5940-00-143-5284 MPN MS25036-15Lug Terminal
- 5940-00-177-4428 MPN MS17121-11Stud Terminal
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-290-2044 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35241-20 | Military Standards |