NSN 5305-00-292-5490
High Torque Screw
Furnished with o ring.
Manufacturer part number HT42UA21 for national stock number 5305002925490.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-292-5490.
-
MPN or Model
HT42UA21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 1.765 inches and 1.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.501 inches and 0.506 inches -
Head Height
Between 0.058 inches and 0.060 inches -
Grip Diameter
Between 0.2797 inches and 0.2807 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-280-3337 MPN HT4013-3-8XClose Tolerance Screw
- 5305-00-008-5881 MPN NAS1101E003Machine Screw
- 5305-00-114-2025 MPN NAS1221-3-3PMachine Screw
- 5305-00-702-1616 MPN NAS1133-7Close Tolerance Screw
- 5305-00-764-3033 MPN HT5UA5-19Machine Screw
- 5305-00-844-2459 MPN NAS1204-34DClose Tolerance Screw
- 5305-00-941-6411 MPN NAS1134-5Close Tolerance Screw
- 5305-00-971-7370 MPN NAS1151-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-292-5490 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT42UA21 | Hi-shear Corporation |
HT410A4-21 | Alcoa Global Fasteners, Inc. |
HT42UA21 | Lisi Aerospace Canada Corp |
3M54-4-21 | Boeing Company, The |
54268-4-21 | Sps Technologies Inc Unbrako Div |