NSN 5305-00-297-0768
Tap Bolt
2.750 inches fastener length, hexagon head style, between 0.455 inches and 0.483 inches head height, width between flats: between 1.100 inches and 1.125 inches .
Manufacturer part number 271774 for national stock number 5305002970768.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-297-0768.
-
MPN or Model
271774
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.750 inches and 2.000 inches -
Fastener Length
2.750 inches -
Head Style
Hexagon -
Head Height
Between 0.455 inches and 0.483 inches -
Width Between Flats
Between 1.100 inches and 1.125 inches -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
10 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification 1st treatment response or qq-z-325, type 1, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-088-3602 MPN 7926000-151Composition Fixed Resistor
- 4920-00-099-8116 MPN 2968Aircraft Engine Maintenance Fixture
- 5930-00-296-6229 MPN 1507590Pressure Switch
- 5945-00-647-1249 MPN 6815143Relay Assembly
- 5950-00-819-4925 MPN 7918031-066Power Transformer
- 4920-00-862-5712 MPN 6796846-5Adapter Cone
- 5305-00-010-0711 MPN 100711Machine Screw
- 5305-00-018-1565 MPN 181565Hexagon Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-297-0768 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
271774 | General Motors Llc |
271774 | General Motors Corp |