NSN 5305-00-298-8100
Bolt Stove
0.719 inches fastener length, flat countersunk head style, between 0.371 inches and 0.385 inches head diameter, internal drive style: slot.
Manufacturer part number AN509-10-11 for national stock number 5305002988100.
Datasheet
-
Product description
Machine Screw NSN 5305-00-298-8100.
-
MPN or Model
AN509-10-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
0.719 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.371 inches and 0.385 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp 8630 -
Screw Material Specification
Sae assn standard single material response -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-117-8014 MPN 10554224Precision Wire Wound Variable Resistor
- 5935-00-134-5330 MPN 10556261-3Electrical Receptacle Connector
- 5985-00-187-7815 MPN 10559849-13Fixed Attenuator
- 5905-00-324-5005 MPN 7599055Film Fixed Resistor
- 5935-00-502-1930 MPN 7602336Electrical Plug Connector
- 5905-00-552-2442 MPN 8625453-44Film Fixed Resistor
- 5930-00-756-3667 MPN 11014915Assembly Switch
- 5905-00-801-7992 MPN 7599055Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-298-8100 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-10-11 | Aeronautical Standards Group |
7602556 | Us Army Ardec Rdecom |
AN509-10-11 | Air Force-navy Aeronautical |