NSN 5305-00-305-1334
High Torque Screw
2.038 inches fastener length, fillister head style, between 0.373 inches and 0.374 inches head diameter, head height: 0.560 inches .
Manufacturer part number 68A450996-2001 for national stock number 5305003051334.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-305-1334.
-
MPN or Model
68A450996-2001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
2.038 inches -
Head Style
Fillister -
Head Diameter
Between 0.373 inches and 0.374 inches -
Head Height
0.560 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
1.613 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
15000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.900 inches first hole and 1.910 inches first hole -
Material
Steel comp 4340 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps23041, fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-015-1460 MPN 32-31841-303Aircraft Structural Component Support
- 5945-00-256-0667 MPN 32-76129-77Electromagnetic Relay
- 4920-00-279-5462 MPN CD17C1513-19Master-constan Minimum Ring Gage
- 1560-00-280-6429 MPN 68A350718-2031Canopy Fairing Assembly
- 1560-00-283-8125 MPN 68A335100-2022Aircraft Fairing
- 1560-00-394-5887 MPN 53-42001-116Door Clip
- 5905-00-403-4037 MPN 5M932P1X701Nonprecision Nonwire Wound Variable Resistor
- 1560-00-426-8158 MPN 53-73208-314Pylon Beam Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-305-1334 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68A450996-2001 | Boeing Company, The |