NSN 5305-00-307-1538
Panel Screw
Between 0.593 inches and 0.625 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number 7528255P052A for national stock number 5305003071538.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-307-1538.
-
MPN or Model
7528255P052A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.168 inches and 0.208 inches -
Fastener Length
Between 0.593 inches and 0.625 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
First Diameter From Head
Between 0.115 inches and 0.125 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.385 inches and 0.457 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 -
Material Specification
Qq-s-763 federal specification 1st material response or astm a582 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-149-2679 MPN K43J559-2Tip Jack
- 5985-00-702-4008 MPN 7638081P0001Waveguide Assembly
- 5935-01-226-4282 MPN 7618395-10Electrical Receptacle Connector
- 5930-01-226-8414 MPN 7591067P1Push Switch
- 5985-01-277-8930 MPN 7547513P0003Variable Attenuator
- 5935-01-394-2782 MPN 149D3078G1Electrical Connector Retaining Plate
- 5930-01-411-7793 MPN 7637699P329Push Button
- 5905-00-952-1939 MPN 7435351P64Inductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-307-1538 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7528255P052A | Lockheed Martin Corp |
7528255P52A | Lockheed Martin Corp |