NSN 5305-00-315-3152
Adjusting Screw
About this product
Drilled and tapped hole no. 6-32 thru head and shoulder.
Manufacturer part number 46177-4 for national stock number 5305003153152.
Datasheet
-
Product description
Thumbscrew NSN 5305-00-315-3152.
-
MPN or Model
46177-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
1.813 inches -
Head Style
Knurled no. 1 -
Head Diameter
1.500 inches -
Head Height
0.437 inches -
Point Length
0.125 inches -
First Diameter From Head
1.000 inches -
Second Diameter From Head
Between 0.151 inches and 0.161 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.188 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
0.875 inches -
Point Style
Cone -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Externally Relieved Body Diameter Quantity
2 -
Point Chamfer Angle
60.0 degrees -
Material
Steel comp 303 -
Material Specification
Qq-s-764 federal specification single material response -
Surface Treatment
Paint -
Surface Treatment Specification
Black pentrate 44286, fscm 24930 mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-112-0972 MPN 5560445-47Film Fixed Resistor
- 5940-00-257-1273 MPN 5560058Terminal
- 5930-00-402-7392 MPN G330080S5Thermostatic Switch
- 5950-00-482-9582 MPN 160040-1Power Transformer
- 5940-00-511-8194 MPN G360017-13Lug Terminal
- 5950-00-645-9140 MPN 52663-1Reactor
- 5950-00-647-7389 MPN A55202Radio Frequency Transformer
- 5950-00-648-4782 MPN 23826Power Transformer
Thumbscrew
An externally threaded fastener whose threaded portion is of one nominal diameter. It may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. It has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. For items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).
Pricing and Availability
Get a quote for 5305-00-315-3152 thumbscrewManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
46177-4 | Harris Corporation |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.