NSN 5305-00-316-7377
High Torque Screw
Between 0.766 inches and 0.796 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number HT4025L4-4 for national stock number 5305003167377.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-316-7377.
-
MPN or Model
HT4025L4-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 0.766 inches and 0.796 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.562 inches and 0.573 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-211-8165 MPN BACS12BE02-4Machine Screw
- 5305-00-283-7459 MPN HT8137-5-9ASClose Tolerance Screw
- 5305-00-347-8355 MPN HT409A4-10Shoulder Screw
- 5305-00-567-7373 MPN NAS583-13Close Tolerance Screw
- 5305-01-027-2005 MPN HT4020-3-7AClose Tolerance Screw
- 5305-01-030-9133 MPN HT4041-3-5-5Close Tolerance Screw
- 5305-01-064-4692 MPN C7985-3-3Close Tolerance Screw
- 5305-01-146-6140 MPN ST3M714-4-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-316-7377 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L4-4 | Huck International, Inc. |
ST3M454-4L4 | Hi-shear Corporation |
ST3M454-4L4 | Lisi Aerospace Canada Corp |
HT4025L4-4 | Arconic Global Fasteners & Rings, |
ST3M454-4L4 | Arconic Global Fasteners & Rings, |
ST3M454-4L4 | Fastener Innovation Technology, Inc. |
11905-4L4 | Reid Products Inc. |
ST3M454-4L4 | West Coast Aerospace Inc |
ST3M454-4L4 | Sps Technologies, Llc |
HT4025L4-4 | Sps Technologies Ltd Tj Brooks |
ST3M454-4L4 | Boeing Company, The |
HT4025L4-4 | Sps Technologies Inc |
HT4025L4-4 | Huck Intl Inc |
10125164 | Nimikkeistokeskus Ncb Finland |
HT4025L4-4 | Sps Technologies, Llc |
HT4025L4-4 | Hi-shear Corporation |
HT4025L4-4 | Sps Technologies, Llc |
HT4025L4-4 | Alcoa Global Fasteners, Inc. |
ST3M454-414 | Fastener Innovation Technology, Inc. |
WC402514-4 | West Coast Aerospace Inc |