NSN 5305-00-316-8095
High Torque Screw
Between 0.484 inches and 0.514 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1630 inches and 0.1635 inches .
Manufacturer part number HT4017-08-3 for national stock number 5305003168095.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-316-8095.
-
MPN or Model
HT4017-08-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.484 inches and 0.514 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.164 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
23-112 ty d, 76301 mfr ref single material response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-406-5225 MPN NAS1102-06-48Machine Screw
- 5305-00-508-3049 MPN LS15265V4-6Close Tolerance Screw
- 5305-00-522-9607 MPN HT4025L3D16Close Tolerance Screw
- 5305-00-926-5535 MPN NAS1189C3P7LSocket Head Cap Screw
- 5305-01-004-8296 MPN NAS1189-04P4LSocket Head Cap Screw
- 5305-01-013-9600 MPN BM19031-7-29DClose Tolerance Screw
- 5305-01-022-9611 MPN LS15264V08-7Machine Screw
- 5305-01-048-2658 MPN HT4009-3-4Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-316-8095 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4017-08-3 | Huck International, Inc. |
HT4017-08-3 | Sps Technologies, Llc |
HT4017-08-3 | Hi-shear Corporation |
HT4017-08-3 | Sps Technologies, Llc |
HT4017-08-3 | Alcoa Global Fasteners, Inc. |
HT4017-08-3 | Lisi Aerospace Canada Corp |
HT4017-08-3 | Sps Technologies, Llc |
ST3M649-08-3 | Boeing Company, The |
HT4017-08-3 | Huck Intl Inc |
10125175 | Nimikkeistokeskus Ncb Finland |
Stock Check
- NS: 91
- NE: 300