NSN 5305-00-316-8096
High Torque Screw
Between 1.043 inches and 1.063 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS27577-4-10 for national stock number 5305003168096.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-316-8096.
-
MPN or Model
MS27577-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.297 inches and 0.318 inches -
Fastener Length
Between 1.043 inches and 1.063 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.625 inches and 0.641 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.953 inches first hole and 0.973 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-121-8895 MPN CA4520-4-18Close Tolerance Screw
- 5305-00-422-1471 MPN CA29040-04-3-4PPanel Screw Assembly
- 5305-00-763-2957 MPN CA13170-3-3-10FSKPanel Screw Assembly
- 5305-01-381-2297 MPN CA2808C3-9PKPanel Screw Assembly
- 5306-01-359-6902 MPN CA21037-6-2HSInternal Wrenching Bolt
- 5305-00-004-5149 MPN 51B334-17Close Tolerance Screw
- 5305-00-061-5496 MPN 106750-6-13Close Tolerance Screw
- 5305-00-395-3456 MPN HT4024L5-9-1Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-316-8096 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-4-10 | Military Standards |
CA4520-4-10 | Arconic Global Fasteners & Rings, |
AS195-4-10 | Avibank Mfg., Inc. |
106466-4-10 | Sps Technologies, Llc |