NSN 5305-00-316-8104
High Torque Screw
Between 1.766 inches and 1.796 inches fastener length, fillister countersunk head style, between 0.389 inches and 0.394 inches head diameter, head height: between 0.070 inches and 0.074 inches .
Manufacturer part number HT4024L4-21 for national stock number 5305003168104.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-316-8104.
-
MPN or Model
HT4024L4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.766 inches and 1.796 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.389 inches and 0.394 inches -
Head Height
Between 0.070 inches and 0.074 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-054-8437 MPN LD111-0044-0302Machine Screw
- 5305-00-501-9870 MPN LS15267V3-18Machine Screw
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-01-106-2356 MPN HT4068-6-25AClose Tolerance Screw
- 5305-01-211-0682 MPN BACB30LH3U29Close Tolerance Screw
- 5305-01-241-5079 MPN HT4054-3-8AClose Tolerance Screw
- 5305-01-264-1472 MPN LD111-0044-2512Close Tolerance Screw
- 5305-01-288-1420 MPN SC1776-7-11Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-316-8104 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L4-21 | Huck International, Inc. |
HT4024L4-21 | Arconic Global Fasteners & Rings, |
HT4024L4-21 | Sps Technologies, Llc |
HT4024L4-21 | Sps Technologies, Llc |
HT4024L4-21 | Hi-shear Corporation |
HT4024L4-21 | Lisi Aerospace Canada Corp |
ST3M455-4L21-1 | Fastener Innovation Technology, Inc. |
11907-4L21-1 | Reid Products Inc. |
ST3M455-4L21-1 | Alcoa Global Fasteners, Inc. |
ST3M455-4L21-1 | Cmp Products A Division Of British |
ST3M455-4L21-1 | Boeing Company, The |
HT4024L4-21 | Sps Technologies Inc |
HT4024L4-21 | Huck Intl Inc |
HT4024L4-21 | Alcoa Global Fasteners, Inc. |