NSN 5305-00-323-2448
High Torque Screw
Between 1.501 inches and 1.531 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 3MA586-14T for national stock number 5305003232448.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-323-2448.
-
MPN or Model
3MA586-14T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.666 inches -
Fastener Length
Between 1.501 inches and 1.531 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4130 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-8503 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Paint head -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-018-8623 MPN 32-31961-18Aircraft Skin
- 1560-00-115-7544 MPN 32-32530-13Center Fuselage Shingle
- 1560-00-123-9419 MPN 53-07450-3Air Blanket Assembly
- 1560-00-137-5291 MPN 53-50046-31Hose Support Bracket
- 1560-00-152-2558 MPN 32-33026-21Fairing Structural Clip
- 1560-00-173-3951 MPN 53G970702-5Slat Control Drive Link
- 1560-00-173-3961 MPN 53G970838-29Aircraft Skin
- 1560-00-225-7011 MPN 32-32050-0217Aircraft Access Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-323-2448 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA586-14T | Boeing Company, The |
3MFRA586-14T | Boeing Company, The |
3MA586-14T | Boeing Company, The |
3MFRA586-14T | Boeing Company, The |