NSN 5305-00-338-0416
High Torque Screw
1.800 inches fastener length, fillister head style, between 0.437 inches and 0.447 inches head diameter, head height: 0.560 inches .
Manufacturer part number A51F11517-11 for national stock number 5305003380416.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-338-0416.
-
MPN or Model
A51F11517-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.800 inches -
Head Style
Fillister -
Head Diameter
Between 0.437 inches and 0.447 inches -
Head Height
0.560 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
38.0 rockwell c and 47.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-047-2030 MPN 89WM1097-2Hinge Asy
- 1560-00-075-0861 MPN 123BH10002-7Aircraft Floor
- 1560-00-075-0934 MPN 128ABM10082-3Wing Fold Con Lever
- 1560-00-075-8218 MPN 128CM12041-1Control Link Assembly
- 1560-00-135-4973 MPN 128EC11148-7Drain Assembly
- 1560-00-165-7615 MPN 87791-1LAircraft Latch Assembly
- 5985-00-172-6273 MPN 123SCAV5494-1Waveguide Assembly
- 1560-00-232-8044 MPN 1128EC41127-3Cooling Duct Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-338-0416 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A51F11517-11 | Delpo Precision Tool And |
A51F11517-11 | Northrop Grumman Systems Corporation |
A51F11517-11 | Delpo Precision Tool And |
A51F11517-11 | Northrop Grumman Systems Corporation |