NSN 5305-00-338-1794
High Torque Screw
Between 0.705 inches and 0.735 inches fastener length, pan head style, between 0.597 inches and 0.612 inches head diameter, head height: between 0.203 inches and 0.218 inches .
Manufacturer part number HT8180-5-4L for national stock number 5305003381794.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-338-1794.
-
MPN or Model
HT8180-5-4L
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.495 inches -
Fastener Length
Between 0.705 inches and 0.735 inches -
Head Style
Pan -
Head Diameter
Between 0.597 inches and 0.612 inches -
Head Height
Between 0.203 inches and 0.218 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-626-2705 MPN HG143-05Aircraft Maintenance Fixture
- 5305-00-040-9449 MPN ST3M454-5D29Close Tolerance Screw
- 5305-01-056-1511 MPN BACB30LU4-22Close Tolerance Screw
- 5305-01-134-2723 MPN HT4049-6-16Close Tolerance Screw
- 5305-01-144-5595 MPN HT4009-5-22Shoulder Screw
- 5305-01-158-5373 MPN SC2163-5-6Machine Screw
- 5305-01-238-8882 MPN HT4020-5-13AYShoulder Screw
- 5305-01-241-5078 MPN HT4020-7-23AYShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-338-1794 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT8180-5-4L | Arconic Global Fasteners & Rings, |
HT8180-5-41 | Arconic Global Fasteners & Rings, |
HT8180-5-4L | Alcoa Global Fasteners, Inc. |
112-1050-001 | Armco Inc |