NSN 5305-00-338-2089
High Torque Screw
Between 1.657 inches and 1.704 inches fastener length, flat countersunk head style, between 0.451 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 53B334-19 for national stock number 5305003382089.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-338-2089.
-
MPN or Model
53B334-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.459 inches and 0.526 inches -
Fastener Length
Between 1.657 inches and 1.704 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.451 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9517 MPN NAS1101-04-18Machine Screw
- 5305-00-809-3053 MPN 51B221-15HMachine Screw
- 5305-01-139-6065 MPN NAS1101-4-20Machine Screw
- 5305-01-298-0646 MPN AIC984B3-20Close Tolerance Screw
- 5305-01-304-2489 MPN AIC1147-4-9PClose Tolerance Screw
- 5305-01-333-6304 MPN AIC1701-4-9Machine Screw
- 5305-01-381-5755 MPN AIC1652-5-45Close Tolerance Screw
- 5305-01-410-6632 MPN SM-C-800983-39Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-338-2089 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B334-19 | Arconic Global Fasteners & Rings, |
53B334-19 | Northrop Grumman Technical Services, |
53B334-19 | Huck International, Inc. |
53B334-19 | Sps Technologies, Llc |
53B334-19 | Alcoa Global Fasteners, Inc. |
53B334-19 | Sps Technologies, Llc |
53B334-19 | Hi-shear Corporation |
53B334-19 | Sps Technologies, Llc |
53B334-19 | Lisi Aerospace Canada Corp |
53B334-19 | Huck Intl Inc |
53B334-19 | Northrop Grumman Systems Corporation |
53B334-19 | Northrop Grumman Systems Corporation |