NSN 5305-00-338-2091
High Torque Screw
Between 4.157 inches and 4.204 inches fastener length, flat countersunk head style, between 0.451 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 53B334-59 for national stock number 5305003382091.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-338-2091.
-
MPN or Model
53B334-59
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.459 inches and 0.526 inches -
Fastener Length
Between 4.157 inches and 4.204 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.451 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 3.678 inches and 3.698 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-246-7449 MPN C623-3-3Close Tolerance Screw
- 5305-00-461-5600 MPN AIC1023H10-25Close Tolerance Screw
- 5305-00-526-1038 MPN BACB30LU3-5Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-054-6261 MPN AIC985-3-6PClose Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-058-8433 MPN BACB30ABP8-25AClose Tolerance Screw
- 5305-01-278-5074 MPN AIC984AL4-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-338-2091 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B334-59 | Northrop Grumman Technical Services, |
53B334-59 | Sps Technologies, Llc |
53B334-59 | Sps Technologies, Llc |
53B334-59 | Hi-shear Corporation |
53B334-59 | Lisi Aerospace Canada Corp |
53B334-59 | Huck International, Inc. |
53B334-59 | Sps Technologies, Llc |
53B334-59 | Huck Intl Inc |
53B334-59 | Northrop Grumman Systems Corporation |