NSN 5305-00-339-8810
Bolt Stove
Between 1.235 inches and 1.281 inches fastener length, flat countersunk head style, between 0.283 inches and 0.332 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-8R40 for national stock number 5305003398810.
Datasheet
-
Product description
Machine Screw NSN 5305-00-339-8810.
-
MPN or Model
AN509-8R40
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.111 inches and 1.173 inches -
Fastener Length
Between 1.235 inches and 1.281 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.283 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 4037 or steel comp 8630 -
Screw Material Specification
Ams 6300 assn standard 1st material response or mil-s-6050 military specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 2, cls 3 federal specification single treatment response -
Thread Series Designator
Unc -
Departure From Cited Document
As mod by rev 4
More from these suppliers
- 5975-00-250-6326 MPN AN3050-20Electrical Conduit Ferrule
- 5935-00-259-0642 MPN AN3102A18-5SElectrical Receptacle Connector
- 5935-00-636-6591 MPN AN3108B12S4SElectrical Plug Connector
- 4820-00-684-4584 MPN AN6280-8Check Valve
- 5935-01-046-9243 MPN AN3101A36-10SElectrical Plug Connector
- 5305-00-043-2700 MPN AN507-428-14Machine Screw
- 5305-00-151-1242 MPN AN520-6R4Machine Screw
- 5305-00-151-1311 MPN AN509-8R20Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-339-8810 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-8R40 | Aeronautical Standards Group |