NSN 5305-00-343-0944
High Torque Screw
Between 1.323 inches and 1.353 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AN4-14 for national stock number 5305003430944.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-343-0944.
-
MPN or Model
AN4-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.323 inches and 1.353 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-182-9356 MPN NAS1101C3H12Machine Screw
- 5305-00-868-1927 MPN 54266-4-5Close Tolerance Screw
- 5305-01-005-6717 MPN 106752-3-404CMachine Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-045-4305 MPN HT4016-4-6YShoulder Screw
- 5305-01-055-2833 MPN 121558-3-A8PClose Tolerance Screw
- 5305-01-055-3750 MPN NAS1101-06-22Machine Screw
- 5305-01-069-6962 MPN HT4010-6-14Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-343-0944 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN4-14 | United Technologies Corporation |
LS15235C3-17 | Sps Technologies, Llc |
LS15235C3-17 | Hi-shear Corporation |
LS15235C3-17 | Alcoa Global Fasteners, Inc. |
LS15235C3-17 | Lisi Aerospace Canada Corp |
LS15235C3-17 | Lockheed Martin Corporation |