NSN 5305-00-345-1584
High Torque Screw
Between 0.551 inches and 0.581 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number LS15265V4-4 for national stock number 5305003451584.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-345-1584.
-
MPN or Model
LS15265V4-4
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.551 inches and 0.581 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy -
Material Specification
Nas621 comp 6al-4v assn standard single material response or ams 4928 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-009-0765 MPN 4N12453-103ATroop Compartment Trim Support
- 1560-00-012-8023 MPN 3F41547-101Petal Door Actuator Bolt
- 1560-00-016-1896 MPN 3W33116-139Trailing Edge Panel Assembly
- 1560-00-081-4192 MPN 796175-115Pitot Pressure Tube
- 1560-00-119-7268 MPN EEP087-170Radome Tee
- 1560-00-130-8469 MPN 4F51137-102BAircraft Structural Component Support
- 1560-00-140-4653 MPN 957015-124Aircraft Leading Edge
- 1560-00-187-8463 MPN 175885Aircraft Hinge
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-345-1584 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15265V4-4 | Lockheed Martin Corporation |
LS15265V4-4 | Lockheed Martin Corporation |