NSN 5305-00-349-0284
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, flat countersunk head style, between 0.296 inches and 0.331 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number LS15235C08-5 for national stock number 5305003490284.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-349-0284.
-
MPN or Model
LS15235C08-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.331 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.164 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-007-8869 MPN 4E51007-111AAircraft Access Door
- 1560-00-009-0771 MPN 4T52005-102AOutboard Elevator Weight
- 1560-00-009-5960 MPN 4F77204-104BFairing Beam Assembly
- 1560-00-014-4412 MPN 766891-19Insulation Blanket
- 1680-00-015-1703 MPN 3C10008-101Forward Contro Stop
- 1680-00-015-4194 MPN 412988-101Seat Separator Support
- 1560-00-047-3549 MPN 146788RFitting
- 1560-00-072-7812 MPN 3P23024-101Engine Support Link Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-349-0284 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C08-5 | Lockheed Martin Corporation |