NSN 5305-00-351-4521
High Torque Screw
Retaining element in shank.
Manufacturer part number CA2720-4-0594 for national stock number 5305003514521.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-351-4521.
-
MPN or Model
CA2720-4-0594
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.421 inches and 0.453 inches -
Fastener Length
Between 1.124 inches and 1.144 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.568 inches and 0.635 inches -
Grip Diameter
Between 0.2480 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.584 inches and 0.604 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Iron alloy 660 or steel comp 303 or steel comp 303se or steel comp 303 plus x -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-00-961-6414 MPN CA1074-1-12Shoulder Screw
- 5305-01-020-0871 MPN CA2652-04-38Close Tolerance Screw
- 5305-01-043-3430 MPN CA2658-4-72Close Tolerance Screw
- 5305-01-242-5959 MPN CA21241C10-7-10Setscrew
- 5305-01-272-9979 MPN CA30056-2-3-8-2Panel Screw Assembly
- 5305-01-292-5334 MPN CA28080-4-11SPanel Screw Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-351-4521 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2720-4-0594 | Arconic Global Fasteners & Rings, |