NSN 5305-00-351-9134
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS15235C3-3 for national stock number 5305003519134.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-351-9134.
-
MPN or Model
LS15235C3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-030-1910 MPN PWA51200Aircraft Engine Maintenance Fixture
- 4920-00-351-0043 MPN PWA23244Aircraft Maintenance Fixture
- 4920-00-398-2920 MPN PWA6936Aircraft Maintenance Fixture
- 4920-00-405-5235 MPN PWA23886Turbine Root Holder
- 4920-00-653-8914 MPN PWA9638Aircraft Engine Maintenance Fixture
- 4920-00-925-5039 MPN PWA21376Aircraft Engine Maintenance Drill Jig
- 4920-01-070-0228 MPN PWA51589-2Augmentor Nozzle Holde Extension
- 4920-01-125-2168 MPN PWA52474-1Locating Block
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-351-9134 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235C3-3 | Lockheed Martin Corporation |
AN445-12B | United Technologies Corporation |