NSN 5305-00-353-9688
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number LS15265V3-5 for national stock number 5305003539688.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-353-9688.
-
MPN or Model
LS15265V3-5
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-270-8090 MPN PWA15368Aircraft Maintenance Fixture
- 4920-00-612-8566 MPN PWA57400Aircraft Engine Maintenance Heater
- 4920-00-793-3574 MPN PWA16529Front Compres Mount
- 4920-00-906-7557 MPN PWA14613Mounting Adapter
- 4920-00-938-4187 MPN PWA11755Interface Device Adapter Assembly
- 4920-01-020-4883 MPN PWA53417Aircraft Component Test Plug
- 4920-01-059-8952 MPN PWA52385-7Torque Plate Collar
- 4920-01-113-8357 MPN PWA53805-6Fixture Block
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-353-9688 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15265V3-5 | Lockheed Martin Corporation |
AN411-4B | United Technologies Corporation |