NSN 5305-00-354-4240
High Torque Screw
Between 1.141 inches and 1.171 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4024L3-12 for national stock number 5305003544240.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-354-4240.
-
MPN or Model
HT4024L3-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.141 inches and 1.171 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-105-7221 MPN 3M926-4L13Close Tolerance Screw
- 5305-01-413-3317 MPN VCL0009-5-31Close Tolerance Screw
- 5305-01-462-2861 MPN 3M1169V3-8AClose Tolerance Screw
- 5305-01-501-4784 MPN 3M1170C3-26AClose Tolerance Screw
- 5306-00-479-0255 MPN 68486-10-016Shear Bolt
- 5306-01-014-5125 MPN VAL23029-5-14Close Tolerance Bolt
- 5306-01-027-3007 MPN VEH160271-3M11Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-354-4240 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L3-12 | Sps Technologies, Llc |
HT4024L3-12 | Hi-shear Corporation |
HT4024L3-12 | Arconic Global Fasteners & Rings, |
HT4024L3-12 | Huck International, Inc. |
ST3M455-3L12-1 | Fastener Innovation Technology, Inc. |
WC4024L3-12 | West Coast Aerospace Inc |
HT4024L3-12 | Lisi Aerospace Canada Corp |
11907-3L12-1 | Reid Products Inc. |
HT4024L3-12 | Sps Technologies Ltd Tj Brooks |
ST3M455-3L12-1 | Boeing Company, The |
10125217 | Nimikkeistokeskus Ncb Finland |
HT4024L3-12 | Alcoa Global Fasteners, Inc. |
ST3M455-3L12-1 | Valley-todeco, Inc. |
HT4024L3-12 | Sps Technologies, Llc |
ST3M455-3L12-1 | Heartland Precision Fasteners, Inc. |
ST3M455-3L12-1 | Houston Precision Fasteners I, Lp |
HT4024L3-12 | Sps Technologies, Llc |
HT4024L3-12 | Sps Technologies, Llc |