NSN 5305-00-354-4244
High Torque Screw
Between 1.266 inches and 1.296 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4024L3-14 for national stock number 5305003544244.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-354-4244.
-
MPN or Model
HT4024L3-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.266 inches and 1.296 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-350-6291 MPN 3016986Close Tolerance Screw
- 5305-00-688-2321 MPN H804-832-8Socket Head Cap Screw
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
- 5305-01-081-0750 MPN HT4016-4-13XShoulder Screw
- 5305-01-142-7230 MPN HT4008-5-16Shoulder Screw
- 5305-01-249-0456 MPN HT4060V4-9DShoulder Screw
- 5305-01-303-6353 MPN SC1823-3-8Close Tolerance Screw
- 5305-01-330-8497 MPN SC3102-4-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-354-4244 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L3-14 | Sps Technologies, Llc |
HT4024L3-14 | Hi-shear Corporation |
HT4024L3-14 | Arconic Global Fasteners & Rings, |
HT4024L3-14 | Huck International, Inc. |
ST3M455-3L14-1 | Fastener Innovation Technology, Inc. |
WC4024L3-14 | West Coast Aerospace Inc |
HT4024L3-14 | Lisi Aerospace Canada Corp |
HT4024L3-14 | Alcoa Global Fasteners, Inc. |
11907-3L14-1 | Reid Products Inc. |
HT4024L3-14 | Sps Technologies Ltd Tj Brooks |
ST3M455-3L14-1 | Boeing Company, The |
3929AS12273R14 | Naval Air Systems Command |
HT4024L3-14 | Sps Technologies Inc |
HT4024L3-14 | Huck Intl Inc |
10125219 | Nimikkeistokeskus Ncb Finland |