NSN 5305-00-357-9760
Bolt Stove
Between 0.109 inches and 0.141 inches fastener length, flat countersunk undercut head style, between 0.099 inches and 0.119 inches head diameter, head height: between 0.018 inches and 0.025 inches .
Manufacturer part number 322-0149-00 for national stock number 5305003579760.
Datasheet
-
Product description
Machine Screw NSN 5305-00-357-9760.
-
MPN or Model
322-0149-00
-
Schedule B
7415.33.8550 (Other copper screws (not for wood) bolts and nuts) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.059 inches and 0.123 inches -
Fastener Length
Between 0.109 inches and 0.141 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.099 inches and 0.119 inches -
Head Height
Between 0.018 inches and 0.025 inches -
Internal Drive Style
Slot -
Thread Diameter
0.060 inches -
Thready Qty Per Inch (tpi)
80 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Copper alloy -
Screw Surface Treatment
Nickel -
Screw Surface Treatment Specification
Qq-n-290, class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-041-2221 MPN 673-0217-00Radio Frequency Transformer
- 5905-00-081-1662 MPN 748-9046-00Noninductive Wire Wound Fixed Resistor
- 5945-00-102-6125 MPN 772-1473-001Electrical Solenoid
- 5930-00-103-5043 MPN 554-9924-005Switch Subassembly
- 5985-00-135-0738 MPN 277-0307-010Directional Coupler
- 5905-00-137-0576 MPN 705-1499-880Film Fixed Resistor
- 5940-00-143-4673 MPN 367-1091-140Sectional Terminal Junction Block
- 5935-00-196-6524 MPN 504-1251-001Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-357-9760 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
322-0149-00 | Rockwell Collins, Inc. |