NSN 5305-00-401-5117
High Torque Screw
Between 1.821 inches and 1.868 inches fastener length, flat countersunk head style, between 1.007 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number HS2623-8Z19 for national stock number 5305004015117.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-401-5117.
-
MPN or Model
HS2623-8Z19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.623 inches -
Fastener Length
Between 1.821 inches and 1.868 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.007 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps13145 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-165-8012 MPN E125-53Machine Screw
- 5305-00-242-4780 MPN E516-155Machine Screw
- 5305-00-526-4145 MPN BACB30LU3D15Close Tolerance Screw
- 5305-00-850-3010 MPN NAS1102-04-3Machine Screw
- 5305-01-043-5749 MPN BM19024-4-10Close Tolerance Screw
- 5305-01-054-6282 MPN H186-6-11Close Tolerance Screw
- 5305-01-055-2833 MPN H185-3-8Close Tolerance Screw
- 5305-01-076-4932 MPN ST3M653C5-9AShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-401-5117 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HS2623-8Z19 | Huck International, Inc. |
66117H8-19 | Sps Technologies, Llc |
3M263-8-19 | Boeing Company, The |
HT195-8-19 | Alcoa Fastening Systems |
HT195-8-19 | Hi-shear Corporation |
HT195-8-19 | Lisi Aerospace Canada Corp |
HT195-8-19 | Satair A/s |
66117H8-19 | Sps Technologies Inc |
HS2623-8Z19 | Huck Intl Inc |