NSN 5305-00-403-0168
High Torque Screw
Between 5.136 inches and 5.166 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1203-78D for national stock number 5305004030168.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-403-0168.
-
MPN or Model
NAS1203-78D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 5.136 inches and 5.166 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Cross recess type 1 -
End Application
Aircraft, hercules c-130 -
Thread Diameter
0.190 inches -
Grip Length
Between 4.865 inches and 4.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.009 inches first hole and 5.059 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
80205-nas1203 professional/industrial association standard
More from these suppliers
- 5305-00-066-8317 MPN NAS1191-3P11LSocket Head Cap Screw
- 5305-00-419-3380 MPN NAS1124-23Close Tolerance Screw
- 5305-00-151-5793 MPN NAS1133-9Close Tolerance Screw
- 5306-00-680-6546 MPN NAS1003-10Machine Bolt
- 5306-00-753-4379 MPN NAS1112-68WShear Bolt
- 5320-01-163-5865 MPN NAS1200M6-6Solid Rivet
- 5305-00-616-1216 MPN NAS1203-13WClose Tolerance Screw
- 5306-00-476-7492 MPN NAS1114-42DShear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-403-0168 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1203-78D | National Aerospace Standards |
NAS1203-78D | Nor-cal Supply Co.inc. |
NAS1203-78D | Hi-shear Corporation |
NAS1203-78D | Sps Technologies, Llc |
NAS1203-78D | Eriks Southwest Inc |
NAS1203-78D | Apcom Inc |
NAS1203-78D | Sps Technologies, Llc |
NAS1203-78D | Lawrence Engineering And Supply Inc |
NAS1203-78D | F And C Sales Inc |
NAS1203-78D | Collins Engineering Corp |
NAS1203-78D | Durham Aircraft Service Inc |
NAS1203-78D | Air Industries Co Inc |