NSN 5305-00-404-1349
High Torque Screw
Between 0.640 inches and 0.687 inches fastener length, flat countersunk head style, between 0.377 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 106292-3-4 for national stock number 5305004041349.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-404-1349.
-
MPN or Model
106292-3-4
-
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.640 inches and 0.687 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.377 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.517 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4130 or steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-040-9879 MPN 53B333-40Close Tolerance Screw
- 5305-00-310-5203 MPN NAS1191-3P12LSocket Head Cap Screw
- 5305-00-345-2367 MPN HT4024L4-13Close Tolerance Screw
- 5305-00-494-7331 MPN NAS1189-06P12Socket Head Cap Screw
- 5305-01-025-4364 MPN 106751-08-311CMachine Screw
- 5305-01-046-3975 MPN HT4010-5-17Shoulder Screw
- 5305-01-053-3358 MPN AIC984-4-2Close Tolerance Screw
- 5305-01-141-7896 MPN 3M958-4-11Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-404-1349 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106292-3-4 | Sps Technologies, Llc |