NSN 5305-00-407-5470
High Torque Screw
Between 0.777 inches and 0.824 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number VS2787T4C8 for national stock number 5305004075470.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-407-5470.
-
MPN or Model
VS2787T4C8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 0.777 inches and 0.824 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Vanadium vasc0 jet m-a fscm 87665 mfr ref single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-7811 MPN SFH22D6A18Machine Screw
- 5305-00-518-5726 MPN NAS1131E102PClose Tolerance Screw
- 5305-00-754-2071 MPN NAS1203-9Close Tolerance Screw
- 5305-01-015-3364 MPN HT4Q25L3-8Close Tolerance Screw
- 5305-01-025-6962 MPN ST3M714-4D15Close Tolerance Screw
- 5305-01-044-0721 MPN NAS1221-08-8PMachine Screw
- 5305-01-063-6418 MPN 4052144Setscrew
- 5305-01-145-5443 MPN NAS1221-06-17Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-407-5470 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2787T4C8 | Alcoa Global Fasteners, Inc. |
SFT930-4-8 | Sps Technologies, Llc |
C079-4-8 | Lockheed Martin Corporation |