NSN 5305-00-407-5471
High Torque Screw
Between 0.898 inches and 0.945 inches fastener length, flat countersunk head style, 0.630 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number VS2545T5F9T for national stock number 5305004075471.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-407-5471.
-
MPN or Model
VS2545T5F9T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.326 inches and 0.393 inches -
Fastener Length
Between 0.898 inches and 0.945 inches -
Head Style
Flat countersunk -
Head Diameter
0.630 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.084 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.787 inches first hole and 0.817 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-482-9697 MPN NAS1101-04-10Machine Screw
- 5305-01-132-6508 MPN HT4025L5-14Close Tolerance Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-310-9248 MPN AIC986-6-7Close Tolerance Screw
- 5305-01-348-7100 MPN AIC1700-4-7Close Tolerance Screw
- 5305-01-428-9525 MPN AIC1353-5CSocket Head Cap Screw
- 5305-01-462-1650 MPN AIC9535-7-40Close Tolerance Screw
- 5305-01-494-4352 MPN TX1026C-19AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-407-5471 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T5F9T | Alcoa Global Fasteners, Inc. |
AIC793-5-9 | Sps Technologies, Llc |
SFT22-5-9 | Sps Technologies, Llc |
VS2545T5F9T | Arconic Global Fasteners & Rings, |
SFT22-5-9 | Sps Technologies, Llc |
C793-5-9 | Lockheed Martin Corporation |