NSN 5305-00-407-5472
High Torque Screw
Between 2.210 inches and 2.257 inches fastener length, flat countersunk head style, 0.630 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number VS2545T5F30T for national stock number 5305004075472.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-407-5472.
-
MPN or Model
VS2545T5F30T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.392 inches -
Fastener Length
Between 2.210 inches and 2.257 inches -
Head Style
Flat countersunk -
Head Diameter
0.630 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.100 inches first hole and 2.130 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-242-4784 MPN A1C812-04-9Machine Screw
- 5305-00-811-6603 MPN 53B334-7Machine Screw
- 5305-00-915-4764 MPN AIC792-3-8Machine Screw
- 5305-01-016-9638 MPN 51B581-4-1Close Tolerance Screw
- 5305-01-359-4729 MPN LE111-0032-2403Machine Screw
- 5305-01-501-4783 MPN TX1004V4-7Machine Screw
- 5305-01-505-4006 MPN TX1024C3-9-7AClose Tolerance Screw
- 5305-01-512-8411 MPN TX1027C3-5AFClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-407-5472 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T5F30T | Alcoa Global Fasteners, Inc. |
AIC793-5-30 | Sps Technologies, Llc |
SFT22-5-30 | Sps Technologies, Llc |
VS2545T5F30T | Arconic Global Fasteners & Rings, |
SFT22-5-30 | Sps Technologies, Llc |
C793-5-30 | Lockheed Martin Corporation |