NSN 5305-00-409-9596
Panel Screw
Between 0.969 inches and 1.000 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number 390595-4 for national stock number 5305004099596.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-409-9596.
-
MPN or Model
390595-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.469 inches and 0.500 inches -
Fastener Length
Between 0.969 inches and 1.000 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
First Diameter From Head
Between 0.115 inches and 0.120 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.500 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 303se or steel comp 304l or steel comp 302b or steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 -
Material Specification
66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-542-9826 MPN 106324-1Inductive Wire Wound Fixed Resistor
- 5985-01-517-8751 MPN 261D1318-1Antenna Assembly
- 5930-00-222-7757 MPN 8282K21CToggle Switch
- 5985-01-067-8610 MPN AM-423-04Antenna
- 5935-00-189-1426 MPN 385940-1Electrical Receptacle Connector
- 5935-00-189-1426 MPN 385940-1Electrical Receptacle Connector
- 5985-00-225-7781 MPN 361197-1Antenna Support
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-409-9596 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
390595-4 | Edo Llc |
390595-4 | Edo Llc |