NSN 5305-00-411-6536
High Torque Screw
Between 2.133 inches and 2.180 inches fastener length, flat countersunk head style, between 1.007 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number 66117H8-24 for national stock number 5305004116536.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-411-6536.
-
MPN or Model
66117H8-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.623 inches and 0.690 inches -
Fastener Length
Between 2.133 inches and 2.180 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.007 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 110.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps13145 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-234-9647 MPN 55979-3-18Shoulder Screw
- 5320-00-156-4467 MPN HL175-6APin-rivet Collar
- 5305-00-067-7808 MPN SFH22D6A10Machine Screw
- 5305-00-141-7146 MPN NAS1191E4P10Socket Head Cap Screw
- 5305-00-141-7320 MPN 122967-08-V12Machine Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-541-9288 MPN 106706T8-15Close Tolerance Screw
- 5305-00-754-2071 MPN NAS1203-9WClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-411-6536 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66117H8-24 | Sps Technologies, Llc |
HT195-8-24 | Hi-shear Corporation |
HT195-8-24 | Lisi Aerospace Canada Corp |
HT195-8-24 | Alcoa Fastening Systems |
HT195-8-24 | Satair A/s |
66117H8-24 | Sps Technologies Inc |