NSN 5305-00-420-0705
High Torque Screw
Between 1.946 inches and 1.993 inches fastener length, flat countersunk head style, 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number C082-6-25 for national stock number 5305004200705.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-420-0705.
-
MPN or Model
C082-6-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.946 inches and 1.993 inches -
Head Style
Flat countersunk -
Head Diameter
0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-057-1720 MPN TS705-06TCRMachine Screw
- 5305-00-235-9883 MPN AIC811-4-20Socket Head Cap Screw
- 5305-00-331-4778 MPN AIC812-08-10Machine Screw
- 5305-00-419-6584 MPN AIC83-4-12Close Tolerance Screw
- 5305-00-450-5978 MPN NAS1101E4H14Machine Screw
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-01-022-3053 MPN LS15236-04-6Machine Screw
- 5305-01-090-6337 MPN BACB30LR4-21Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-420-0705 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C082-6-25 | Lockheed Martin Corporation |
SFT22-6A25 | Sps Technologies, Llc |
C082-6-25 | Arconic Global Fasteners & Rings, |
AIC82-6-25 | Sps Technologies, Llc |
VS2545T6F25 | Alcoa Global Fasteners, Inc. |
SFT22-6A25 | Sps Technologies, Llc |