NSN 5305-00-420-5905
High Torque Screw
Between 0.453 inches and 0.500 inches fastener length, flat countersunk head style, between 0.283 inches and 0.332 inches head diameter, grip diameter: between 0.1610 inches and 0.1640 inches .
Manufacturer part number MS24694A4 for national stock number 5305004205905.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-420-5905.
-
MPN or Model
MS24694A4
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
013680 - Alum Screws -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.328 inches and 0.406 inches -
Fastener Length
Between 0.453 inches and 0.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.283 inches and 0.332 inches -
Grip Diameter
Between 0.1610 inches and 0.1640 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
Between 0.094 inches and 0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
62000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Aluminum alloy 2024 -
Surface Treatment
Anodize -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-425-7399 MPN NAS1063C8-303Terminal Board Marker Strip
- 5940-01-615-1074 MPN NAS1063Terminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-007-0217 MPN NAS1625-2Machine Screw
- 5305-00-051-6981 MPN MS27039DD4-28Machine Screw
- 5305-00-052-5968 MPN MS35202-14Machine Screw
- 5305-00-057-9598 MPN MS21207-6-14Tapping Screw
- 5305-00-057-9972 MPN NAS1351000-6Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-420-5905 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24694A4 | National Aerospace Standards |
MS24694A4 | Military Standards |
AN509DD8R7 | Aeronautical Standards Group |