NSN 5305-00-421-7888
High Torque Screw
Between 0.819 inches and 0.866 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT195-4-7 for national stock number 5305004217888.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-421-7888.
-
MPN or Model
HT195-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.438 inches -
Fastener Length
Between 0.819 inches and 0.866 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mac p.S.13145, fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-136-2800 MPN NAS1190-02P4Machine Screw
- 5305-00-159-5552 MPN NAS1101E06-13Machine Screw
- 5305-00-235-5777 MPN NAS1101-3H18Machine Screw
- 5305-00-549-6974 MPN NAS1152E18Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-820-0751 MPN 51B222-2Machine Screw
- 5305-00-922-5713 MPN DMS7500-8A3Special Screw
- 5305-01-014-2583 MPN S5008-3-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-421-7888 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT195-4-7 | Hi-shear Corporation |
66117H4-7 | Sps Technologies, Llc |
HS2623-4Z7 | Huck International, Inc. |
HT195-4-7 | Lisi Aerospace Canada Corp |
66117H4-7 | Sps Technologies, Llc |
3M263-4-7 | Huck International, Inc. |
3M263-4-7 | Sps Technologies, Llc |
3M263-4-7 | Alcoa Global Fasteners, Inc. |
3M263-4-7 | Boeing Company, The |
HS2623-4Z7 | Huck Intl Inc |