NSN 5305-00-431-7082
Panel Screw
Between 0.610 inches and 0.655 inches fastener length, between 0.365 inches and 0.385 inches head diameter, between 0.099 inches and 0.119 inches head height, first diameter from head: between 0.120 inches and 0.125 inches .
Manufacturer part number ABS20519-08V34LL for national stock number 5305004317082.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-431-7082.
-
MPN or Model
ABS20519-08V34LL
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.220 inches and 0.295 inches -
Fastener Length
Between 0.610 inches and 0.655 inches -
Head Diameter
Between 0.365 inches and 0.385 inches -
Head Height
Between 0.099 inches and 0.119 inches -
First Diameter From Head
Between 0.120 inches and 0.125 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.360 inches and 0.390 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
85000 pounds per square inch -
Material
Stainless steel -
Material Specification
Qq-s-763 federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-110-0734 MPN 79413201401Electrical Plug Connector Body
- 4920-00-187-0566 MPN 85444500040Rotor Shaft Assembl
- 4920-00-708-8027 MPN 18902880000Flight Control System Test Set
- 5905-00-726-5345 MPN 65180269019Composition Fixed Resistor
- 5905-01-081-3616 MPN 65772713320Inductive Wire Wound Fixed Resistor
- 5305-00-443-2658 MPN FFIL105BMachine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-431-7082 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ABS20519-08V34LL | Abscoa Industries Inc |
74455257001 | Kollsman, Inc. |