NSN 5305-00-436-3311
High Torque Screw
Between 1.011 inches and 1.041 inches fastener length, 160000 pounds per square inch min. tensile strength (psi), steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 material, material specification: mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response .
Manufacturer part number NAS1202-12 for national stock number 5305004363311.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-436-3311.
-
MPN or Model
NAS1202-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.011 inches and 1.041 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response
More from these suppliers
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-016-6327 MPN MS24627-38Tapping Screw
- 5305-00-053-1075 MPN MS35199-29Machine Screw
- 5305-00-059-8392 MPN MS35215-62Machine Screw
- 5305-00-069-4942 MPN NAS2806-15Close Tolerance Screw
- 5305-00-071-2089 MPN MS51957-89Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-436-3311 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1202-12 | National Aerospace Standards |