NSN 5305-00-437-5278
High Torque Screw
Between 1.168 inches and 1.188 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS27577-4-12 for national stock number 5305004375278.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-437-5278.
-
MPN or Model
MS27577-4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 1.168 inches and 1.188 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.750 inches and 0.766 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
4680 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.840 inches first hole and 0.866 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-128-3781 MPN 3929AS1320-B17Electrical Connector Backshell
- 5305-00-170-2943 MPN 106712-3-18TClose Tolerance Screw
- 5305-00-574-0236 MPN GB511DU3-5Machine Screw
- 5305-01-007-7064 MPN HT4041-3-2-5Close Tolerance Screw
- 5305-01-010-2364 MPN HT4-16-4-7XShoulder Screw
- 5305-01-013-9599 MPN 73991H-7D25Close Tolerance Screw
- 5305-01-104-1067 MPN HT4068-4-6AClose Tolerance Screw
- 5305-01-106-3861 MPN HT4068-4-32Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-437-5278 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-4-12 | Military Standards |
106466-4-12 | Sps Technologies, Llc |
AS195-4-12 | Avibank Mfg., Inc. |