NSN 5305-00-440-0429
Adjustment Screw Valve
About this product
Between 0.950 inches and 0.970 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number 712B511P1 for national stock number 5305004400429.
Datasheet
-
Product description
Setscrew NSN 5305-00-440-0429.
-
MPN or Model
712B511P1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.360 inches -
Fastener Length
Between 0.950 inches and 0.970 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Hole Diameter
0.070 inches -
Point Length
Between 0.510 inches and 0.550 inches -
Point Diameter
Between 0.364 inches and 0.366 inches -
Point Style
Flat -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.438 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Hole Configuration Style
Hexagon flats -
Point Chamfer Angle
30.0 degrees -
Material
Steel -
Precious Material
Silver -
Surface Treatment
Silver -
Surface Treatment Specification
Ams 2410 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-113-6070 MPN 21C2344P013Rear Bearin Adapter
- 5905-00-486-0925 MPN R996P4600BWire Wound Fixed Resistor
- 5950-00-691-6390 MPN 9JY21AA1Current Transformer
- 4920-00-780-4604 MPN 1C2863G2Control Test Set
- 4820-00-917-2178 MPN 708B526P2Check Valve
- 5905-00-932-2321 MPN R984P0780AInductive Wire Wound Fixed Resistor
- 4920-00-943-5611 MPN 21C2781G001Aircraft Maintenance Fixture
- 5930-00-976-0979 MPN 5015M18G1Push Switch
Setscrew
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-440-0429 setscrewManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
712B511P1 | General Electric Company |
712B511P1 | General Electric Co |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.