NSN 5305-00-440-9973
High Torque Screw
Between 0.908 inches and 0.955 inches fastener length, flat countersunk head style, 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number AIC82-3-11 for national stock number 5305004409973.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-440-9973.
-
MPN or Model
AIC82-3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.210 inches and 0.277 inches -
Fastener Length
Between 0.908 inches and 0.955 inches -
Head Style
Flat countersunk -
Head Diameter
0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.192 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-450-5973 MPN AIC1023V4-14Close Tolerance Screw
- 5305-00-486-2581 MPN AIC1023H10-15Close Tolerance Screw
- 5305-00-917-7603 MPN AIC1023H5-17Machine Screw
- 5305-00-929-1658 MPN A1C792-3-2Machine Screw
- 5305-01-022-0114 MPN AIC617-24Externally Relieved Body Screw
- 5305-01-146-6141 MPN HT4049-4-5Close Tolerance Screw
- 5305-01-158-5373 MPN 3M893-5-6Machine Screw
- 5305-01-158-6763 MPN AIC944-3-16Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-440-9973 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC82-3-11 | Sps Technologies, Llc |
VS2545T3F11 | Alcoa Global Fasteners, Inc. |
SFT22-3A11 | Sps Technologies, Llc |
C082-3-11 | Arconic Global Fasteners & Rings, |
C082-3-11 | Sps Technologies, Llc |
C082-3-11 | Lockheed Martin Corporation |
SFT22-3A11 | Sps Technologies, Llc |