NSN 5305-00-440-9983
High Torque Screw
Between 1.964 inches and 2.011 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number AIC82-4-27 for national stock number 5305004409983.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-440-9983.
-
MPN or Model
AIC82-4-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.266 inches and 0.333 inches -
Fastener Length
Between 1.964 inches and 2.011 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-471-0882 MPN A1102S08-7Machine Screw
- 5305-01-158-5373 MPN 3M893-5-6Machine Screw
- 5305-01-158-6763 MPN AIC944-3-16Machine Screw
- 5305-01-333-9890 MPN AIC1701-3-8Close Tolerance Screw
- 5305-01-338-4569 MPN BACS12GU3K26Machine Screw
- 5305-01-417-2494 MPN TX1026V3-15AClose Tolerance Screw
- 5305-01-436-2386 MPN BACB30LH3-9Close Tolerance Screw
- 5305-01-468-9141 MPN TX1024D5D16-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-440-9983 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC82-4-27 | Sps Technologies, Llc |
VS2545T4F27 | Alcoa Global Fasteners, Inc. |
SFT22-4A27 | Sps Technologies, Llc |
C082-4-27 | Arconic Global Fasteners & Rings, |
C082-4-27 | Lockheed Martin Corporation |
SFT22-4A27 | Sps Technologies, Llc |
AIC82-4-27 | Sps Technologies, Llc |
SFT22-4A27 | Sps Technologies, Llc |
VS2545T4F27 | Alcoa Global Fasteners, Inc. |
C082-4-27 | Lockheed Martin Corporation |
SFT22-4A27 | Sps Technologies, Llc |