NSN 5305-00-440-9994
High Torque Screw
Between 0.759 inches and 0.806 inches fastener length, flat countersunk head style, 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number AIC82-6-6 for national stock number 5305004409994.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-440-9994.
-
MPN or Model
AIC82-6-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 0.759 inches and 0.806 inches -
Head Style
Flat countersunk -
Head Diameter
0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-478-0349 MPN AIC1181-5Close Tolerance Screw
- 5305-00-501-9741 MPN LS15267V3-5Machine Screw
- 5305-00-824-2465 MPN 3MA333CFA6Close Tolerance Screw
- 5305-01-047-1002 MPN BACB30LU5-19Close Tolerance Screw
- 5305-01-055-1146 MPN BACB30LU6-11Close Tolerance Screw
- 5305-01-056-4414 MPN AIC984-3-16PClose Tolerance Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-119-3611 MPN NAS1101E6-18Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-440-9994 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC82-6-6 | Sps Technologies, Llc |
VS2545T6F6 | Alcoa Global Fasteners, Inc. |
SFT22-6A6 | Sps Technologies, Llc |
C082-6-6 | Lockheed Martin Corporation |
SFT22-6A6 | Sps Technologies, Llc |